// Copyright (C) 2024 Gradle, Inc.
//
// Licensed under the Creative Commons Attribution-Noncommercial-ShareAlike 4.0 International License.;
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      https://creativecommons.org/licenses/by-nc-sa/4.0/
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

:gradle-issues: https://github.com/gradle/gradle/issues/

[[config_cache]]
= Configuration Cache
:keywords: configuration cache, configuration-cache, no-configuration-cache, org.gradle.configuration-cache, org.gradle.configuration-cache.problems, org.gradle.configuration-cache.max-problems, org.gradle.configuration-cache.parallel, STABLE_CONFIGURATION_CACHE,

// Run tests for snippets included in this chapter with:
// ./gradlew :docs:docsTest --tests="ExemplarExternalSamplesFunctionalTest.snippet-configuration-cache-*"
// ./gradlew :docs:docsTest --tests="ExemplarExternalSamplesFunctionalTest.snippet-value-providers-*"

The Configuration Cache improves build performance by caching the result of the <<build_lifecycle_intermediate.adoc#build_lifecycle,configuration phase>> and reusing it for subsequent builds.

image::configuration-cache-4.png[]

[[config_cache:intro]]
== Configuration Cache Basics

The <<build_lifecycle_intermediate.adoc#build_lifecycle, Gradle Build Lifecycle>> consists of three phases: **initialization**, **configuration**, and **execution**.

1. The **initialization** phase determines the structure of the build.
2. The **configuration** phase evaluates what work needs to be done.
3. The **execution** phase performs that work.

Gradle’s **Build Cache** has long optimized the execution phase by reusing previously built outputs and parallelizing as much work as possible.

The **Configuration Cache** builds on this idea of _work avoidance_ and _parallelization_.
When enabled, the Configuration Cache allows Gradle to skip the configuration phase entirely if nothing that affects the build configuration (such as build scripts) has changed.
Additionally, Gradle applies performance optimizations to task execution.

To do this, Gradle does the following:

[cols="~,~,~,~"]
|===
| Phase | Cache | Cache Key | Work Avoidance | Parallelism and Performance

| *Configuration* | Configuration Cache | Build logic and environment | Skip project configuration | Runs tasks in parallel within the same project, optimizes memory, and more
| *Execution* | Build Cache | Task inputs | Skip task execution | Runs independent tasks in different projects in parallel with `--parallel`
|===

The Configuration Cache is similar to the <<build_cache#build_cache,Build Cache>>, but they store different types of data:

- *Build Cache*: Stores outputs and intermediate files of the build (e.g., task outputs, artifact transform outputs).
- *Configuration Cache*: Stores the build configuration for a particular set of tasks, capturing the output of the configuration phase.

image::configuration-cache-2.png[]

[IMPORTANT]
====
This feature is _not enabled by default_ and has the following limitations:

- It does not yet support all <<configuration_cache_status.adoc#config_cache:plugins:core, Core Gradle Plugins>> and <<configuration_cache_status.adoc#config_cache:not_yet_implemented, features>>. Full support is in progress.
- Your build and its plugins may require modifications to meet the <<configuration_cache_requirements.adoc#config_cache:requirements, Configuration Cache requirements>>.
- <<config_cache:ide,IDE imports and syncs>> do not yet use the Configuration Cache.
- Continuous Integration (CI) support is actively evolving.

Since Gradle 9.0 the Configuration Cache is the link:https://blog.gradle.org/road-to-configuration-cache#preferred-mode-of-execution[preferred mode of execution].
====

[[config_cache:intro:how_does_it_work]]
== Work Avoidance

When the Configuration Cache is enabled and you run Gradle for a specific set of tasks, such as `./gradlew check`, Gradle looks for a *Configuration Cache entry*.
If a matching entry is found, Gradle reuses it and skips the configuration phase entirely.
A cache hit is essential for avoiding configuration work.

=== Configuration Cache Entries

A cache entry contains:

- The set of tasks to run
- Their configuration details
- Dependency information

=== First-Time Execution

image::configuration-cache-1.png[]

The first time you run a set of tasks, there is no cache entry.
Gradle performs the configuration phase as usual:

1. Run init scripts.
2. Run the settings script, applying any requested settings plugins.
3. Configure and build the `buildSrc` project, if present.
4. Run build scripts, applying any requested project plugins. If plugins come from included builds, Gradle builds them first.
5. Calculate the task graph, executing deferred configuration actions.

Gradle then stores a snapshot of the task graph in the Configuration Cache for future use.
After this, Gradle loads the task graph from the cache and proceeds with task execution.

NOTE: When it is enabled, Gradle always loads from the configuration cache - even on a cache miss - to ensure that hits and misses are handled consistently.

=== Subsequent Runs

image::configuration-cache-3.png[]

On subsequent executions of the same tasks (e.g., `./gradlew check` again), Gradle:

- Skips the configuration phase entirely.
- Loads the task graph from the Configuration Cache instead.

To match a saved entry in the cache, Gradle verifies that no build configuration inputs have changed.
If any input has changed, Gradle reruns the configuration phase and stores a new entry in the cache.

=== Build Configuration Inputs

The following elements determine whether a Configuration Cache entry is valid:

1. Gradle environment
** `GRADLE_USER_HOME`
** Gradle Daemon JVM
2. Init scripts
3. `buildSrc` and included build logic build contents (build scripts, sources, and intermediate build outputs)
4. Build and Settings scripts, including included scripts (`apply from: foo.gradle`)
5. Gradle configuration files (Version Catalogs, dependency verification files, dependency lock files, `gradle.properties` files)
6. Contents of files read at configuration time
7. File system state checked at configuration time (file presence, directory contents, etc.)
8. Custom `ValueSource` values obtained at configuration time (this also includes built-in providers, like `providers.exec` and `providers.fileContents`).
9. System properties used during the configuration phase
10. Environment variables used during the configuration phase

=== Serialization

Gradle uses an optimized serialization mechanism to store Configuration Cache entries.
It automatically serializes object graphs containing simple state or supported types.

While Configuration Cache serialization doesn't rely on Java Serialization, it understands <<configuration_cache_status.adoc#config_cache:not_yet_implemented:java_serialization, some of its features>>.
This can be used to customize serialization behavior, but incurs a performance penalty and should be avoided.

[[config_cache:intro:performance_improvements]]
== Performance Improvements

Beyond skipping the configuration phase, the Configuration Cache enhances performance in the following ways:

- *Parallel Task Execution*: When parallel execution is enabled, even tasks within the same project can be run in parallel, subject to dependency constraints.
- *Cached Dependency Resolution*: Dependency resolution results are stored and reused.

[[config_cache:in_action]]
image::configuration-cache/running-help.gif[]

[[config_cache:ide]]
== IDE Support

If you enable and configure the Configuration Cache in your `gradle.properties` file, it will be automatically enabled when your IDE delegates builds to Gradle.
No additional setup is required.

Because `gradle.properties` is typically checked into source control,
<<userguide/best-practices/best_practices_general.adoc#use_the_gradle_properties_file,enabling the Configuration Cache this way will apply to your entire team>>.
If you prefer to enable it only for your local environment, you can configure it directly in your IDE instead.

NOTE: Syncing a project in an IDE does not benefit from the Configuration Cache. Only running tasks through the IDE will leverage the cache.

[[config_cache:ide:intellij]]
=== IntelliJ based IDEs

In IntelliJ IDEA or Android Studio this can be done in two ways, either globally or per run configuration.

To enable it for the whole build, go to `Run > Edit configurations...`.
This will open the IntelliJ IDEA or Android Studio dialog to configure Run/Debug configurations.
Select `Templates > Gradle` and add the necessary system properties to the `VM options` field.

For example to enable the Configuration Cache, turning problems into warnings, add the following:

[source,text]
----
-Dorg.gradle.configuration-cache=true -Dorg.gradle.configuration-cache.problems=warn
----

You can also choose to only enable it for a given run configuration.
In this case, leave the `Templates > Gradle` configuration untouched and edit each run configuration as you see fit.

Using these methods together, you can enable the Configuration Cache globally while disabling it for certain run configurations, or vice versa.

[TIP]
====
You can use the link:https://github.com/JetBrains/gradle-idea-ext-plugin[gradle-idea-ext-plugin] to configure IntelliJ run configurations from your build.

This is a good way to enable the Configuration Cache only for the IDE.
====

[[config_cache:ide:eclipse]]
=== Eclipse based IDEs

In Eclipse-based IDEs, you can enable the Configuration Cache through Buildship, either globally or per run configuration.

To enable it globally:

1. Go to `Preferences > Gradle`.
2. Add the following JVM arguments:
** `-Dorg.gradle.configuration-cache=true`
** `-Dorg.gradle.configuration-cache.problems=warn`

To enable it for a specific run configuration:

1. Open `Run Configurations....`
2. Select the desired configuration.
3. Navigate to `Project Settings`, check `Override project settings`, and add the same system properties as `JVM arguments`.

Using these methods together, you can enable the Configuration Cache globally while disabling it for certain run configurations, or vice versa.
