# Best Practices for Tasks

version 9.1.0-20250804182631+0000

## Avoid DependsOn

The task dependsOn method should only be used for lifecycle tasks (tasks without task actions).

### Explanation

Tasks with actions should declare their inputs and outputs so that Gradle’s up-to-date checking can automatically determine when these tasks need to be run or rerun.

Using `dependsOn` to link tasks is a much coarser-grained mechanism that does not allow Gradle to understand why a task requires a prerequisite task to run, or which specific files from a prerequisite task are needed. `dependsOn` forces Gradle to assume that every file produced by a prerequisite task is needed by this task. This can lead to unnecessary task execution and decreased build performance.

### Example

Here is a task that writes output to two separate files:

build.gradle.kts

    abstract class SimplePrintingTask : DefaultTask() {
        @get:OutputFile
        abstract val messageFile: RegularFileProperty

        @get:OutputFile
        abstract val audienceFile: RegularFileProperty

        @TaskAction (1)
        fun run() {
            messageFile.get().asFile.writeText("Hello")
            audienceFile.get().asFile.writeText("World")
        }
    }

    tasks.register<SimplePrintingTask>("helloWorld") { (2)
        messageFile.set(layout.buildDirectory.file("message.txt"))
        audienceFile.set(layout.buildDirectory.file("audience.txt"))
    }

build.gradle

    abstract class SimplePrintingTask extends DefaultTask {
        @OutputFile
        abstract RegularFileProperty getMessageFile()

        @OutputFile
        abstract RegularFileProperty getAudienceFile()

        @TaskAction (1)
        void run() {
            messageFile.get().asFile.write("Hello")
            audienceFile.get().asFile.write("World")
        }
    }

    tasks.register("helloWorld", SimplePrintingTask) { (2)
        messageFile = layout.buildDirectory.file("message.txt")
        audienceFile = layout.buildDirectory.file("audience.txt")
    }

1 | Task With Multiple Outputs: `helloWorld` task prints "Hello" to its `messageFile` and "World" to its `audienceFile`.
2 | Registering the Task: `helloWorld` produces "message.txt" and "audience.txt" outputs.

#### Don’t Do This

If you want to translate the greeting in the `message.txt` file using another task, you could do this:

build.gradle.kts

    abstract class SimpleTranslationTask : DefaultTask() {
        @get:InputFile
        abstract val messageFile: RegularFileProperty

        @get:OutputFile
        abstract val translatedFile: RegularFileProperty

        init {
            messageFile.convention(project.layout.buildDirectory.file("message.txt"))
            translatedFile.convention(project.layout.buildDirectory.file("translated.txt"))
        }

        @TaskAction (1)
        fun run() {
            val message = messageFile.get().asFile.readText(Charsets.UTF_8)
            val translatedMessage = if (message == "Hello") "Bonjour" else "Unknown"

            logger.lifecycle("Translation: " + translatedMessage)
            translatedFile.get().asFile.writeText(translatedMessage)
        }
    }

    tasks.register<SimpleTranslationTask>("translateBad") {
        dependsOn(tasks.named("helloWorld")) (2)
    }

build.gradle

    abstract class SimpleTranslationTask extends DefaultTask {
        @InputFile
        abstract RegularFileProperty getMessageFile()

        @OutputFile
        abstract RegularFileProperty getTranslatedFile()

        SimpleTranslationTask() {
            messageFile.convention(project.layout.buildDirectory.file("message.txt"))
            translatedFile.convention(project.layout.buildDirectory.file("translated.txt"))
        }

        @TaskAction (1)
        void run() {
            def message = messageFile.get().asFile.text
            def translatedMessage = message == "Hello" ? "Bonjour" : "Unknown"

            logger.lifecycle("Translation: " + translatedMessage)
            translatedFile.get().asFile.write(translatedMessage)
        }
    }

    tasks.register("translateBad", SimpleTranslationTask) {
        dependsOn(tasks.named("helloWorld")) (2)
    }

1 | Translation Task Setup: `translateBad` requires `helloWorld` to run first to produce the message file otherwise it will fail with an error as the file does not exist.
2 | Explicit Task Dependency: Running `translateBad` will cause `helloWorld` to run first, but Gradle does not understand why.

#### Do This Instead

Instead, you should explicitly wire task inputs and outputs like this:

build.gradle.kts

    abstract class SimpleTranslationTask : DefaultTask() {
        @get:InputFile
        abstract val messageFile: RegularFileProperty

        @get:OutputFile
        abstract val translatedFile: RegularFileProperty

        init {
            messageFile.convention(project.layout.buildDirectory.file("message.txt"))
            translatedFile.convention(project.layout.buildDirectory.file("translated.txt"))
        }

        @TaskAction (1)
        fun run() {
            val message = messageFile.get().asFile.readText(Charsets.UTF_8)
            val translatedMessage = if (message == "Hello") "Bonjour" else "Unknown"

            logger.lifecycle("Translation: " + translatedMessage)
            translatedFile.get().asFile.writeText(translatedMessage)
        }
    }

    tasks.register<SimpleTranslationTask>("translateGood") {
        inputs.file(tasks.named<SimplePrintingTask>("helloWorld").map { messageFile }) (1)
    }

build.gradle

    abstract class SimpleTranslationTask extends DefaultTask {
        @InputFile
        abstract RegularFileProperty getMessageFile()

        @OutputFile
        abstract RegularFileProperty getTranslatedFile()

        SimpleTranslationTask() {
            messageFile.convention(project.layout.buildDirectory.file("message.txt"))
            translatedFile.convention(project.layout.buildDirectory.file("translated.txt"))
        }

        @TaskAction (1)
        void run() {
            def message = messageFile.get().asFile.text
            def translatedMessage = message == "Hello" ? "Bonjour" : "Unknown"

            logger.lifecycle("Translation: " + translatedMessage)
            translatedFile.get().asFile.write(translatedMessage)
        }
    }

    tasks.register("translateGood", SimpleTranslationTask) {
        inputs.file(tasks.named("helloWorld", SimplePrintingTask).map { messageFile }) (1)
    }

1 | Register Implicit Task Dependency: `translateGood` requires only one of the files that is produced by `helloWorld`.

Gradle now understands that `translateGood` requires `helloWorld` to have run successfully first because it needs to create the `message.txt` file which is then used by the translation task. Gradle can use this information to optimize task scheduling. Using the `map` method avoids eagerly retrieving the `helloWorld` task until the output is needed to determine if `translateGood` should run.

### References

- Task Inputs and Outputs

### Tags

`#tasks`, `#inputs-and-outputs`, `#up-to-date-checking`

## Favor `@CacheableTask` and `@DisableCachingByDefault` over `cacheIf(Spec)` and `doNotCacheIf(String, Spec)`

The `cacheIf` and `doNotCacheIf` methods should only be used in situations where the cacheability of a task varies between different task instances or cannot be determined until the task is executed by Gradle. You should instead favor annotating the task class itself with `@CacheableTask` annotation for any task that is always cacheable. Likewise, the `@DisableCachingByDefault` should be used to always disable caching for all instances of a task type.

### Explanation

Annotating a task type will ensure that each task instance of that type is properly understood by Gradle to be cacheable (or not cacheable). This removes the need to remember to configure each of the task instances separately in build scripts.

Using the annotations also documents the intended cacheability of the task type within its own source, appearing in Javadoc and making the task’s behavior clear to other developers without requiring them to inspect each task instance’s configuration. It is also slightly more efficient than running a test to determine cacheability.

Remember that only tasks that produce reproducible and relocatable output should be marked as `@CacheableTask`.

### Example

#### Don’t Do This

If you want to reuse the output of a task, you shouldn’t do this:

build.gradle.kts

    abstract class BadCalculatorTask : DefaultTask() { (1)
        @get:Input
        abstract val first: Property<Int>

        @get:Input
        abstract val second: Property<Int>

        @get:OutputFile
        abstract val outputFile: RegularFileProperty

        @TaskAction
        fun run() {
            val result = first.get() + second.get()
            logger.lifecycle("Result: $result")
            outputFile.get().asFile.writeText(result.toString())
        }
    }

    tasks.register<Delete>("clean") {
        delete(layout.buildDirectory)
    }

    tasks.register<BadCalculatorTask>("addBad1") {
        first = 10
        second = 25
        outputFile = layout.buildDirectory.file("badOutput.txt")
        outputs.cacheIf { true } (2)
    }

    tasks.register<BadCalculatorTask>("addBad2") { (3)
        first = 3
        second = 7
        outputFile = layout.buildDirectory.file("badOutput2.txt")
    }

build.gradle

    abstract class BadCalculatorTask extends DefaultTask {
        @Input
        abstract Property<Integer> getFirst()

        @Input
        abstract Property<Integer> getSecond()

        @OutputFile
        abstract RegularFileProperty getOutputFile()

        @TaskAction
        void run() {
            def result = first.get() + second.get()
            logger.lifecycle("Result: " + result)
            outputFile.get().asFile.write(result.toString())
        }
    }

    tasks.register("clean", Delete) {
        delete layout.buildDirectory
    }

    tasks.register("addBad1", BadCalculatorTask) {
        first = 10
        second = 25
        outputFile = layout.buildDirectory.file("badOutput.txt")
        outputs.cacheIf { true }
    }

    tasks.register("addBad2", BadCalculatorTask) {
        first = 3
        second = 7
        outputFile = layout.buildDirectory.file("badOutput2.txt")
    }

1 | Define a Task: The `BadCalculatorTask` type is deterministic and produces relocatable output, but is not annotated.
2 | Mark the Task Instance as Cacheable: This example shows how to mark a specific task instance as cacheable.
3 | Forget to Mark a Task Instance as Cacheable: Unfortunately, the `addBad2` instance of the `BadCalculatorTask` type is not marked as cacheable, so it will not be cached, despite behaving the same as `addBad1`.

#### Do This Instead

As this task meets the criteria for cacheability (we can imagine a more complex calculation in the `@TaskAction` that would benefit from automatic work avoidance via caching), you should mark the task type itself as cacheable like this:

build.gradle.kts

    @CacheableTask (1)
    abstract class GoodCalculatorTask : DefaultTask() {
        @get:Input
        abstract val first: Property<Int>

        @get:Input
        abstract val second: Property<Int>

        @get:OutputFile
        abstract val outputFile: RegularFileProperty

        @TaskAction
        fun run() {
            val result = first.get() + second.get()
            logger.lifecycle("Result: $result")
            outputFile.get().asFile.writeText(result.toString())
        }
    }

    tasks.register<Delete>("clean") {
        delete(layout.buildDirectory)
    }

    tasks.register<GoodCalculatorTask>("addGood1") { (2)
        first = 10
        second = 25
        outputFile = layout.buildDirectory.file("goodOutput.txt")
    }

    tasks.register<GoodCalculatorTask>("addGood2") {
        first = 3
        second = 7
        outputFile = layout.buildDirectory.file("goodOutput2.txt")
    }

build.gradle

    @CacheableTask (1)
    abstract class GoodCalculatorTask extends DefaultTask {
        @Input
        abstract Property<Integer> getFirst()

        @Input
        abstract Property<Integer> getSecond()

        @OutputFile
        abstract RegularFileProperty getOutputFile()

        @TaskAction
        void run() {
            def result = first.get() + second.get()
            logger.lifecycle("Result: " + result)
            outputFile.get().asFile.write(result.toString())
        }
    }

    tasks.register("clean", Delete) {
        delete layout.buildDirectory
    }

    tasks.register("addGood1", GoodCalculatorTask) {
        first = 10
        second = 25
        outputFile = layout.buildDirectory.file("goodOutput.txt")
    }

    tasks.register("addGood2", GoodCalculatorTask) { (2)
        first = 3
        second = 7
        outputFile = layout.buildDirectory.file("goodOutput2.txt")
    }

1 | Annotate the Task Type: Applying the `@CacheableTask` to a task type informs Gradle that instances of this task should always be cached.
2 | Nothing Else Needs To Be Done: When we register task instances, nothing else needs to be done - Gradle knows to cache them.

### References

- Caching Tasks

- Cacheable Tasks

- Non-cacheable Tasks

### Tags

`#tasks`, `#caching`

## Do not call `get()` on a Provider outside a Task action

When configuring tasks and extensions do not call `get()` on a provider, use `map()`, or `flatMap()` instead.

### Explanation

A provider should be evaluated as late as possible. Calling `get()` forces immediate evaluation, which can trigger unintended side effects, such as:

- The value of the provider becomes an input to configuration, causing potential configuration cache misses.

- The value may be evaluated too early, meaning you might not be using the final or correct value of the property. This may lead to painful and hard to debug ordering issues.

- It breaks Gradle’s ability to build dependencies and to track task inputs and outputs, making automatic task dependency wiring impossible. See Working with task inputs and outputs

It is preferable to avoid explicitly evaluating a `Provider` at all, and deferring to `map`/`flatMap` to connect `Providers` to `Providers` implicitly.

### Example

Here is a task that writes an input `String` to a file:

build.gradle.kts

    abstract class MyTask : DefaultTask() {
        @get:Input
        abstract val myInput: Property<String>

        @get:OutputFile
        abstract val myOutput: RegularFileProperty

        @TaskAction
        fun doAction() {
            val outputFile = myOutput.get().asFile
            val outputText = myInput.get() (1)
            println(outputText)
            outputFile.writeText(outputText)
        }
    }

    val currentEnvironment: Provider<String> = providers.gradleProperty("currentEnvironment").orElse("234") (2)

build.gradle

    abstract class MyTask extends DefaultTask {
        @Input
        abstract Property<String> getMyInput()

        @OutputFile
        abstract RegularFileProperty getMyOutput()

        @TaskAction
        void doAction() {
            def outputFile = myOutput.get().asFile
            def outputText = myInput.get() (1)
            println(outputText)
            outputFile.write(outputText)
        }
    }

    Provider<String> currentEnvironment = providers.gradleProperty("currentEnvironment").orElse("234") (2)

1 | Using `Provider.get()` in the task action
2 | Gradle property that we wish to use as input

#### Don’t Do This

You could call `get()` at configuration time to set up this task:

build.gradle.kts

    tasks.register<MyTask>("avoidThis") {
        myInput = "currentEnvironment=${currentEnvironment.get()}"  (1)
        myOutput = layout.buildDirectory.get().asFile.resolve("output-avoid.txt")  (2)
    }

build.gradle

    tasks.register("avoidThis", MyTask) {
        myInput = "currentEnvironment=${currentEnvironment.get()}"  (1)
        myOutput = new File(layout.buildDirectory.get().asFile, "output-avoid.txt")  (2)
    }

1 | Reading the value of `currentEnvironment` at configuration time: This value might change by the time the task start executing.
2 | Reading the value of `buildDirectory` at configuration time: This value might change by the time the task start executing.

#### Do This Instead

Instead, you should explicitly wire task inputs and outputs like this:

build.gradle.kts

    tasks.register<MyTask>("doThis") {
        myInput = currentEnvironment.map { "currentEnvironment=$it" }  (1)
        myOutput = layout.buildDirectory.file("output-do.txt")  (2)
    }

build.gradle

    tasks.register("doThis", MyTask) {
        myInput = currentEnvironment.map { "currentEnvironment=$it" }  (1)
        myOutput = layout.buildDirectory.file("output-do.txt")  (2)
    }

1 | Using `map()` to transform `currentEnvironment`: `map` transform runs only when the value is read.
2 | Using `file()` to create a new `Provider<RegularFile>`: the value of the `buildDirectory` is only checked when the value of the provider is read.

### References

- Task Inputs and Outputs

### Tags

`#tasks`, `#inputs-and-outputs`

## Group and Describe custom Tasks

When defining custom task types or registering ad-hoc tasks, always set a clear `group` and `description`.

### Explanation

A good group name is short, lowercase, and reflects the purpose or domain of the task. For example: `documentation`, `verification`, `release`, or `publishing`.

Before creating a new group, look for an existing group name that aligns with your task’s intent. It’s often better to reuse an established category to keep the task output organized and familiar to users.

This information is used in the Tasks Report (shown via `./gradlew tasks`) to group and describe available tasks in a readable format.

Providing a group and description ensures that your tasks are:

- Displayed clearly in the report

- Categorized appropriately

- Understandable to other users (and to your future self)

| Tasks with no group are hidden from the Tasks Report unless `--all` is specified.

### Example

#### Don’t Do This

Tasks without a group appear under the "other" category in `./gradlew tasks --all` output, making them harder to locate:

app/build.gradle.kts

    tasks.register("generateDocs") {
        // Build logic to generate documentation
    }

app/build.gradle

    tasks.register('generateDocs') {
        // Build logic to generate documentation
    }

    $ gradlew :app:tasks --all

    > Task :app:tasks

    ------------------------------------------------------------
    Tasks runnable from project ':app'
    ------------------------------------------------------------

    Other tasks
    -----------
    compileJava - Compiles main Java source.
    compileTestJava - Compiles test Java source.
    generateDocs
    processResources - Processes main resources.
    processTestResources - Processes test resources.
    startScripts - Creates OS specific scripts to run the project as a JVM application.

#### Do this Instead

When defining custom tasks, always assign a clear `group` and `description`:

app/build.gradle.kts

    tasks.register("generateDocs") {
        group = "documentation"
        description = "Generates project documentation from source files."
        // Build logic to generate documentation
    }

app/build.gradle

    tasks.register('generateDocs') {
        group = 'documentation'
        description = 'Generates project documentation from source files.'
        // Build logic to generate documentation
    }

    $ gradlew :app:tasks --all

    > Task :app:tasks

    ------------------------------------------------------------
    Tasks runnable from project ':app'
    ------------------------------------------------------------

    Documentation tasks
    -------------------
    generateDocs - Generates project documentation from source files.
    javadoc - Generates Javadoc API documentation for the 'main' feature.

### References

- Task Group and Description

### Tags

`#tasks`

## Avoid using eager APIs on File Collections

When working with Gradle’s file collection types, be careful to avoid triggering dependency resolution during the configuration phase.

### Explanation

Gradle’s `Configuration` and `FileCollection` types extend the JDK’s `Collection<File>` interface.

However, calling some available methods from this interface—such as `.size()`, `.isEmpty()`, `getFiles()`, `asPath()`, or `.toList()`—on these Gradle types will implicitly trigger resolution of their dependencies. The same is possible using Kotlin stdlib collection extension methods or Groovy GDK collection extensions. Converting a `Configuration` to a `Set<File>` also discards any implicit task dependencies it carries.

You should avoid using these methods when configuring your build. Instead, use the methods defined directly on the Gradle interfaces - this is a necessary first step towards preventing eager resolutions. Be sure to use lazy types and APIs that defer resolution to wire task dependencies and inputs correctly. Some methods that cause resolution are not obvious. Be sure to check the actual behavior when using configurations in an atypical way.

### Example

#### Don’t Do This

build.gradle.kts

    abstract class FileCounterTask: DefaultTask() {
        @get:InputFiles
        abstract val countMe: ConfigurableFileCollection

        @TaskAction
        fun countFiles() {
            logger.lifecycle("Count: " + countMe.files.size)
        }
    }

    tasks.register<FileCounterTask>("badCountingTask") {
        if (!configurations.runtimeClasspath.get().isEmpty()) { (1)
            logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.get().state == RESOLVED))
            countMe.from(configurations.runtimeClasspath)
        }
    }

    tasks.register<FileCounterTask>("badCountingTask2") {
        val files = configurations.runtimeClasspath.get().files (2)
        countMe.from(files)
        logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.get().state == RESOLVED))
    }

    tasks.register<FileCounterTask>("badCountingTask3") {
        val files = configurations.runtimeClasspath.get() + layout.projectDirectory.file("extra.txt") (3)
        countMe.from(files)
        logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.get().state == RESOLVED))
    }

    tasks.register<Zip>("badZippingTask") { (4)
        if (!configurations.runtimeClasspath.get().isEmpty()) {
            logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.get().state == RESOLVED))
            from(configurations.runtimeClasspath)
        }
    }

build.gradle

    abstract class FileCounterTask extends DefaultTask {
        @InputFiles
        abstract ConfigurableFileCollection getCountMe();

        @TaskAction
        void countFiles() {
            logger.lifecycle("Count: " + countMe.files.size())
        }
    }

    tasks.register("badCountingTask", FileCounterTask) {
        if (!configurations.runtimeClasspath.isEmpty()) { (1)
            logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.state == RESOLVED))
            countMe.from(configurations.runtimeClasspath)
        }
    }

    tasks.register("badCountingTask2", FileCounterTask) {
        def files = configurations.runtimeClasspath.files (2)
        countMe.from(files)
        logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.state == RESOLVED))
    }

    tasks.register("badCountingTask3", FileCounterTask) {
        def files = configurations.runtimeClasspath + layout.projectDirectory.file("extra.txt") (3)
        countMe.from(files)
        logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.state == RESOLVED))
    }

    tasks.register("badZippingTask", Zip) { (4)
        if (!configurations.runtimeClasspath.isEmpty()) {
            logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.state == RESOLVED))
            from(configurations.runtimeClasspath)
        }
    }

1 | `isEmpty()` causes resolution: Many seemingly harmless Collection API methods like `isEmpty()` cause Gradle to resolve dependencies.
2 | Accessing files directly: Using `getFiles()` to access the files in a `Configuration` will also cause Gradle to resolve the file collection.
3 | Adding a file via plus operator: Using the plus operator will force the `runtimeClasspath` configuration to be resolved implicitly. The implementation of `Configuration` doesn’t override the plus operator for regular files, therefore it falls back to using the eager API, which causes resolution.
4 | Be careful with indirect inputs: Some built-in tasks, for example subtypes of `AbstractCopyTask` like `Zip`, allow adding inputs indirectly and can have the same problems.

#### Do This Instead

To avoid issues, always defer resolution until the execution phase. Use APIs that support lazy evaluation.

build.gradle.kts

    abstract class FileCounterTask: DefaultTask() {
        @get:InputFiles
        abstract val countMe: ConfigurableFileCollection

        @TaskAction
        fun countFiles() {
            logger.lifecycle("Count: " + countMe.files.size)
        }
    }

    tasks.register<FileCounterTask>("goodCountingTask") {
        countMe.from(configurations.runtimeClasspath) (1)
        countMe.from(layout.projectDirectory.file("extra.txt"))
        logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.get().state == RESOLVED))
    }

build.gradle

    abstract class FileCounterTask extends DefaultTask {
        @InputFiles
        abstract ConfigurableFileCollection getCountMe();

        @TaskAction
        void countFiles() {
            logger.lifecycle("Count: " + countMe.files.size())
        }
    }

    tasks.register("goodCountingTask", FileCounterTask) {
        countMe.from(configurations.runtimeClasspath) (1)
        countMe.from(layout.projectDirectory.file("extra.txt")) (2)
        logger.lifecycle("Resolved: " + (configurations.runtimeClasspath.state == RESOLVED))
    }

1 | Add configurations to Task properties or Specs directly: This will defer resolution until the task is executed.
2 | Add files to Specs separately: This allows combining files with file collections without triggering implicit resolutions.

### Tags

`#tasks`, `#inputs-and-outputs`, `#configurations`

## Don’t resolve Configurations before Task Execution

Resolving configurations before the task execution phase can lead to incorrect results and slower builds.

### Explanation

Resolving a configuration - either directly via calling its `resolve()` method or indirectly via accessing its set of artifacts - returns a set of files that does not preserve references to the tasks that produced those files.

Configurations are file collections and can be added to `@InputFiles` properties on other tasks. It is important to do this correctly to avoid breaking automatic task dependency wiring between a consumer task and any tasks that are implicitly required to produce the artifacts being consumed. For example, if a configuration contains a project dependency, Gradle knows that consumers of the configuration must first run any tasks that produce that project’s artifacts.

In addition to correctness concerns, resolving configurations during the configuration phase can slow down the build, even when running unrelated tasks (e.g., `help`) that don’t require the resolved dependencies.

### Example

#### Don’t Do This

build.gradle.kts

    dependencies {
        runtimeOnly(project(":lib")) (1)
    }

    abstract class BadClasspathPrinter : DefaultTask() {
        @get:InputFiles
        var classpath: Set<File> = emptySet() (2)

        private fun calculateDigest(fileOrDirectory: File): Int {
            require(fileOrDirectory.exists()) { "File or directory $fileOrDirectory doesn't exist" }
            return 0 // actual implementation is stripped
        }

        @TaskAction
        fun run() {
            logger.lifecycle(
                classpath.joinToString("\n") {
                    val digest = calculateDigest(it) (3)
                    "$it#$digest"
                }
            )
        }
    }

    tasks.register("badClasspathPrinter", BadClasspathPrinter::class) {
        classpath = configurations.named("runtimeClasspath").get().resolve() (4)
    }

build.gradle

    dependencies {
        runtimeOnly(project(":lib")) (1)
    }

    abstract class BadClasspathPrinter extends DefaultTask {
        @InputFiles
        Set<File> classpath = [] as Set (2)

        protected int calculateDigest(File fileOrDirectory) {
            if (!fileOrDirectory.exists()) {
                throw new IllegalArgumentException("File or directory $fileOrDirectory doesn't exist")
            }
            return 0 // actual implementation is stripped
        }

        @TaskAction
        void run() {
            logger.lifecycle(
                classpath.collect { file ->
                    def digest = calculateDigest(file) (3)
                    "$file#$digest"
                }.join("\n")
            )
        }
    }

    tasks.register("badClasspathPrinter", BadClasspathPrinter) {
        classpath = configurations.named("runtimeClasspath").get().resolve() (4)
    }

1 | Add project dependency: The `:lib` project must be built in order to resolve the runtime classpath successfully.
2 | Declare input property as Set of files: A simple `Set` input doesn’t track task dependencies.
3 | Dependency artifacts are used to calculate digest: Artifacts from the already resolved classpath are used to calculate the digest.
4 | Resolve runtimeClasspath: The implicit task dependency on `:library:jar` task is lost here when the configuration is resolved prior to task execution. The `lib` project will not be built when the `:app:badClasspathPrinter` task is run, leading to a failure in `calculateDigest` because the `lib.jar` file will not exist.

#### Do This Instead

To avoid issues, always defer resolution to the execution phase by using lazy APIs like FileCollection.

build.gradle.kts

    dependencies {
        runtimeOnly(project(":lib")) (1)
    }

    abstract class GoodClasspathPrinter : DefaultTask() {
        @get:InputFiles
        abstract val classpath: ConfigurableFileCollection (2)

        private fun calculateDigest(fileOrDirectory: File): Int {
            require(fileOrDirectory.exists()) { "File or directory $fileOrDirectory doesn't exist" }
            return 0 // actual implementation is stripped
        }

        @TaskAction
        fun run() {
            logger.lifecycle(
                classpath.joinToString("\n") {
                    val digest = calculateDigest(it) (3)
                    "$it#$digest"
                }
            )
        }
    }

    tasks.register("goodClasspathPrinter", GoodClasspathPrinter::class.java) {
        classpath.from(configurations.named("runtimeClasspath")) (4)
    }

build.gradle

    dependencies {
        runtimeOnly(project(":lib")) (1)
    }

    abstract class GoodClasspathPrinter extends DefaultTask {

        @InputFiles
        abstract ConfigurableFileCollection getClasspath() (2)

        protected int calculateDigest(File fileOrDirectory) {
            if (!fileOrDirectory.exists()) {
                throw new IllegalArgumentException("File or directory $fileOrDirectory doesn't exist")
            }
            return 0 // actual implementation is stripped
        }

        @TaskAction
        void run() {
            logger.lifecycle(
                classpath.collect { file ->
                    def digest = calculateDigest(file) (3)
                    "$file#$digest"
                }.join("\n")
            )
        }
    }

    tasks.register("goodClasspathPrinter", GoodClasspathPrinter) {
        classpath.from(configurations.named("runtimeClasspath")) (4)
    }

1 | Add project dependency: This is the same.
2 | Declare input files property as ConfigurableFileCollection: This lazy collection type will track task dependencies.
3 | Dependency artifacts are resolved to calculate digest: The classpath will be resolved at execution time to calculate the digest.
4 | Configuration is passed to input property directly: Using `from` causes the configuration to be lazily wired to the input proeprty. The configuration will be resolved when necessary, preserving task dependencies. The output reveals that the `lib` project is now built when the `:app:goodClasspathPrinter` task is run because of the implicit task dependency, and the `lib.jar` file is found when calculating the digest.

### Tags

`#tasks`, `#inputs-and-outputs`, `#configurations`